Oak series
Natural and smoked oak grains for the warm, residential look. Our most-ordered series in West Africa.
Materials & performance
What the panel is made of, and what it does
Three layers, one product family. Below: the construction, the measured absorption figures and the honest limits of both.
Construction
The three layers
| Wearing face | MDF slats, 6 mm, 750 g/m² density, cut on a CNC. Carries the pattern and the rigidity. |
|---|---|
| Absorbing core | Polyester fibre felt in 500 / 800 / 900 / 1000 / 1350 g/m², 3–7 mm depending on the build. Open-cell, this is the layer that absorbs sound. |
| Backing | The felt itself acts as the backing. Shaped panels add a black MDF rear layer to hold the relief. |
| Finish | Technical wood veneer or PVC film, hot-pressed, 0.2–0.5 mm depending on the series. |
Acoustic data
NRC by build
Noise Reduction Coefficient is a single-number average of absorption at 250, 500, 1000 and 2000 Hz. It is useful for comparing products and useless for predicting a room. Figures below are the average of our own sample tests, quoted as a range because the mounting method moves the result.
| Build | Felt | NRC (sample average) | Typical use |
|---|---|---|---|
| DT-1 · 9 mm | 3 mm / 500 g/m² | 0.75 – 0.80 | Corridors, light renovation |
| DT-2 · 11 mm | 5 mm / 800 g/m² | 0.75 – 0.80 | Offices, classrooms, retail |
| WQ-1 · 11 mm | 5 mm / 900 g/m² | 0.75 – 0.80 | Curves, columns, arches |
| DT-3 · 16 mm | 7 mm / 1000 g/m² | 0.80 – 0.85 | Meeting rooms, lecture halls |
| DT-4 · 18 mm | 1350 g/m² | 0.80 – 0.85 | Ballrooms, cinema walls |
| DT-5 · 21 mm | 1350 g/m² | 0.80 – 0.85 | Studios, worship halls |
| YX series · 21 mm | 1350 g/m² | 0.80 – 0.85 | Feature walls, atriums |
Mounted on battens?
Add roughly 0.05 to the NRC and a clear improvement below 250 Hz. The most cost-effective upgrade in the range.
Large room?
NRC is not enough. Ask your acoustic consultant for a reverberation-time calculation; we can supply panel dimensions and absorption data for the model.
Certificate needed?
B1 and E0 certificates are supplied with shipping documents on request — needed for most tender files.
Fire and emission
B1 and E0 on every model
Fire rating B1 (China GB 8624) and formaldehyde emission E0 (GB 18580) apply to the complete panel build, not to the veneer on its own. For a tender file, ask for the certificate set — it goes out with the shipping documents at no extra cost.
- B1: difficult to ignite, self-extinguishing, low smoke
- E0: formaldehyde emission ≤ 0.05 mg/m³, suitable for interiors with prolonged occupancy
- Certificates issued per production batch; tell us if your client needs a specific batch reference
Local building codes vary. B1 and E0 satisfy the Chinese national standard — check whether your market requires an additional local test and tell us before the order, not after.
Colour and finish
Eight finish series, 35+ colours
One colour card across straight, flexible and shaped panels. Order a curved column and a flat wall in the same series and they will match.
Technical wood 01
Engineered veneer with a consistent grain — specified where panels must match across separate deliveries.
Technical wood 02
Darker walnut and wenge tones for hotel lobbies and boardrooms.
PVC film 01
Wood-grain PVC at a lower price and tighter colour consistency than veneer.
Slat colour collection
Our full slat colour range photographed together — use it to pick a family before ordering a sample.
Metal series
Brushed and mirror-effect films for retail and hospitality feature walls.
Natural series
Light ash and birch tones for Scandinavian-style interiors.
PS series
Deep matt finishes for high-end residential and suite interiors.
Screen colour is not panel colour. Every series is available as a physical A4 sample — free, you pay the courier. Order the sample before you specify a colour on a 500 m² project.
Dimensions
Standard sizes and tolerances
| Straight panel (DT-1 – DT-5) | 600 × 2400 mm · thickness 9 / 11 / 16 / 18 / 21 mm |
|---|---|
| Flexible panel (WQ-1) | 600 × 2400 × 11 mm · minimum bend radius ≈ 300 mm |
| Shaped panels (YX-1 – YX-13) | From 260 × 300 mm to 600 × 2400 mm, 21 mm, thirteen modules |
| Dimensional tolerance | ± 1 mm on length and width; ± 0.5 mm on thickness |
| Custom size | Available from 300 m² per order; confirm before quoting |
| Surface flatness | ≤ 0.5 mm deviation across a 600 mm panel face |
Ask for the technical data sheet
We send the full data sheet — construction, NRC table, fire and emission certificates, fixing details — as one PDF for your tender file.